Articles
Setting up your Husqvarna 125BVX as a blower or a vac

Follow the steps below or watch the video for correctly setting up your Husqvarna 125BVX as a blower or a vac.

Setting up the Husqvarna 125BVX as a blower

You will need:
Blow tubes
Combination spanner
125BVX machine

  1. Loosen the screw on the bottom of the blow pipe by using your combination spanner
  2. Insert the blow pipe with a hook on one end and two knobs on the other into the blow pipe
  3. Tighten the screw back up, turning the screw clockwise
  4. Fit the required lower pipe by lining up the connections and twist to lock on

Setting up the Husqvarna 125BVX as a Vacuum

You will need:
Vac kit
Combination spanner
125BVX machine

  1. Lay the machine to have the impeller facing up
  2. To fit the blow pipe, use the combination spanner to pop open the shroud
  3. Fit the blow pipe by aligning the padlock symbol on the vac pipe to the unlocked padlock symbol on the vac housing
  4. Twist vac pipe to the direction of the locked symbol on the vac housing
  5. Fit elbow pipe to bag by inserting into zipped side of bag and pulling the hooked end of the pipe out through the provided hole in the bag for the vac pipe.
  6. Fit vac bag pipe to the machine by loosening the screw on the bottom of the blow pipe by using your combination spanner
  7. Once fitted re tighten screw
  8. Fit supplied shoulder strap to vac bag


Return to Articles Home Page